Skip to content

Download G3D100 firmware

G3D100 firmware

Software version 0404
Hardware version 0101; 0102
Date 2011-04-05
Description 1080p24 and 1080p24sf standards added.
Note: Vertical zoom is not possible for 3G sources.
Note Important notice:<br />Before you upgrade one of your Axon Synapse cards, please check the software version of the rackcontroller (RRC) that you are using. If you are running version 3100 please contact <a href="mailto:support@axon.tv">support@axon.tv</a> to get the newest release of the rackcontroller software. We strongly recommend not to use version 3100 of the rackcontroller software while upgrading your cards as we have experienced some instability during reprogramming which can render your Synapse card in an unusable state.
  Download
Software version 0203
Hardware version 0100; 0101; 0102
Date 2010-10-01
Description This card may be updated through the front ethernet connector on the card, which is quicker as compared to programming with Cortex / Synapse setup. For instructions please refer to the Synapse module reprogramming guide (available on http://www.axon.tv/EN/support/downloads/manuals ) under Chapter 2 re-programming Linux based cards or contact support.
Included in this download are the Cortex Layout Forms (CLF files), please copy them to your cortex installation directory for the latest graphical user interface : {.....Cortex_install_dir....}\Forms\Device\{filename.clf}

First Release

Fixed: 3G in/out support.
Fixed: Changed h/v position so scaling is no longer applied.
Added: Manual zoom controls to be able to correct voids in the video that are introduced by positioning.
Added: 2D to 3D conversion. Now it is possible to add horizontal shift to the left and right input picture.
Note: Vertical zoom is not possible for 3G sources.
Note Important notice:<br />Before you upgrade one of your Axon Synapse cards, please check the software version of the rackcontroller (RRC) that you are using. If you are running version 3100 please contact <a href="mailto:support@axon.tv">support@axon.tv</a> to get the newest release of the rackcontroller software. We strongly recommend not to use version 3100 of the rackcontroller software while upgrading your cards as we have experienced some instability during reprogramming which can render your Synapse card in an unusable state.
  Download
Login to MyAXON


Register for MyAXON
Reset password

Sluiten