Skip to content

Download HVO10 firmware

HVO10 firmware

Software version 0605
Hardware version 0100; 0101; 0102
Date 2009-12-15
Description 1) Added NonPCM-Bypass = On/Off setting.
When NonPCM-Bypass=On -> detecting NonPCM on stereo-pairs the audio processing on these stereo-pairs is bypassed.
When NonPCM-Bypass=Off -> if NonPCM is detected and a Gain-setting (different then 0dB) is applied for these channels, the NonPCM-data will be corrupted.
Note Important notice:<br />Before you upgrade one of your Axon Synapse cards, please check the software version of the rackcontroller (RRC) that you are using. If you are running version 3100 please contact <a href="mailto:support@axon.tv">support@axon.tv</a> to get the newest release of the rackcontroller software. We strongly recommend not to use version 3100 of the rackcontroller software while upgrading your cards as we have experienced some instability during reprogramming which can render your Synapse card in an unusable state.
  Download
Software version 0504
Hardware version 0100; 0101; 0102
Date 2008-12-08
Description 1) Solved: swapped audio-channels in embedder-core when switching SDI-Input-sources using a specific timing.
2) Added audio-status-bit overwrite. This fixes dissappearing audio after shuffling mono channels which appeared on some equipment.
Explanation: When an embedded audio-source is used which includes the z-bit (start-of-frame for audio status bits) only in 1 channel of a stereo pair,
the z-bit may be lost on an output stereo pair after shuffling channels (inserting 2 channels without z-bit into one stereo pair).
In this case the user is able to regenerate a set of status-bits by setting the Audio-Status to "overwrite".
This function is automatically bypassed if non-PCM (Dolby-E, AC3 etc.) is detected on a stereo-pair.
Note Important notice:<br />Before you upgrade one of your Axon Synapse cards, please check the software version of the rackcontroller (RRC) that you are using. If you are running version 3100 please contact <a href="mailto:support@axon.tv">support@axon.tv</a> to get the newest release of the rackcontroller software. We strongly recommend not to use version 3100 of the rackcontroller software while upgrading your cards as we have experienced some instability during reprogramming which can render your Synapse card in an unusable state.
  Download
Software version 0403
Hardware version 0100; 0101; 0102
Date 2008-10-24
Description - Solved preset1-startup-bugg: Preset1 was overwritten with the actual-preset when the card was powered-up.
Note Important notice:<br />Before you upgrade one of your Axon Synapse cards, please check the software version of the rackcontroller (RRC) that you are using. If you are running version 3100 please contact <a href="mailto:support@axon.tv">support@axon.tv</a> to get the newest release of the rackcontroller software. We strongly recommend not to use version 3100 of the rackcontroller software while upgrading your cards as we have experienced some instability during reprogramming which can render your Synapse card in an unusable state.
  Download
Software version 0303
Hardware version 0100; 0101; 0102
Date 2008-07-23
Description - First release
Note Important notice:<br />Before you upgrade one of your Axon Synapse cards, please check the software version of the rackcontroller (RRC) that you are using. If you are running version 3100 please contact <a href="mailto:support@axon.tv">support@axon.tv</a> to get the newest release of the rackcontroller software. We strongly recommend not to use version 3100 of the rackcontroller software while upgrading your cards as we have experienced some instability during reprogramming which can render your Synapse card in an unusable state.
  Download
Login to MyAXON


Register for MyAXON
Reset password

Sluiten