GXP880 - 3Gb/s, HD and SD and ASI/DVB and SMPTE-310M 8x8 router and master cross-point board

Description

The GXP880 is part of the SynCross system. SynCross is a Synapse based modular video routing system capable of switching 3Gb/s, HD and SD SDI signals, as well as compressed domain signals such as ASI/DVB and SSI/SMPTE-310. The SynCross routing system can populate Synapse frames from 1 slot with 8 in- and outputs (with the GXP880) up to 5 slots for a 40x40 routing solution (Q2 2012). It is very simple to expand a SynCross system up to 40 in and outputs, both in electrical or fiber or a mix between optical and electrical.  This system can be controlled over the Ethernet, Cortex Control Panels or Cortex. ACP and a RS422 port are available for control with automation systems.

 The GXP880 is the center part of the SynCross system and can be used standalone as a 8x8 router.

• Supports 3Gb/s, HD, SD SDI, ASI/DVB, composite (SD) and SSI/SMPTE-310
• Possible to integrate into other Synapse applications
•  Four card types
  •  GXP880 (SYNXP1) – Xpoint board with 8 inputs and outputs
• 2 types of back panels
  • BPH25 – contains 8 inputs and outputs and ethernet connection (Xpoint board)
  • BPH26 – contains 8 inputs and outputs and RS422 connection (I/O boards)
• Expandable system starting from 8x8 up to a 40x40 router
• Square router
  • 8x8  (16x16 – 24x24 – 32x32 - 40x40 = Q2, 2012)
• Non square router – depending on amount of populated sfp cages
  • Available Q2 2012
• Mnemonics
• System can run on two references. Both SD and HD at the same time
• Option to bypass reclocker for SMPTE-310 (19.4Mb/s) purposes
• DIN1.0/2.3, HD-BNC and/or LC fiber connections
• Three types of control
  • Controllable with SW-P-02 protocol or Ethernet protocol (Axonized)
  • Control via ACP (Axon Command Protocol) commands i.e. Cortex or third party software
  • Stand alone
• Assignable hardware panel
  • 1RU 19”
  • Stackable
  • Relegendable buttons through Cortex and stand alone (CCP1601)