GRB100 - 3Gb/s, HD, SD dual SDI in embedded domain shuffler and re-embedder with S2020 metadata insertion

Description

The GRB100 is a 64x16 channel shuffler - re-embedder. The source audio channels used for embedding into the output SDI can be derived from 2 individual 3Gb/s HD or SD inputs and from the 32 channels that are available in the quad speed multiplexing audio ADD-ON bus.

One of the nice features of this card is that the output embeds 16 channels and that the source for these audio can be derived from both SDI input 1 (that normally also carries the video) and from SDI input 2. Input two can be connected to a second SDI source that is just used for carrying audio. (the two SDI streams need to be clock locked)

Features

• 2 SDI inputs (with auto switch on carrier loss, and switch back function)
• 2 SDI outputs
• Compatible with the following input formats (auto selecting)

• 1080p/59.94 1080p/50 1080i/59.94 1080i/50 1080p/30 1080p25

  1080p23.98 1035i/59.94  720p/59.94  720p50  SD525  SD625

• Single VIDEO delay adjustable between 0 and 500ms
• Two SDI inputs can source the audio de-embedder when sources are clock locked (not phase locked*)
• De-embedding of all 32 channels from SDI 1 and SDI 2 to the Synapse bus
•  32 extra inputs through the quad speed Synapse bus
• 7 presets that configure all embedding channels. controlled by GPI or ACP (Cortex)
•  S2020 metadata reading and insertion from an external source
• Metadata-shuffler (can also be used as metadata-generator)
• Append and overwrite modes
• Audio level and phase control
• Audio offset delay up to 5000 ms
• Transparent for ATC time code RP188, RP196, RP215
• Full control and status monitoring through the front panel of the SFR04/SFR08/SFR18 frame and the Ethernet port (ACP)
• Optional 1 or 2 fiber inputs, 1 or 2  fiber outputs or a fiber in and output (replacing 1 SDI in and output) on the I/O panel
• Optional relay bypass (BHX18D)

* (In 2-SDI shuffle mode the sources need to be running on the same clock, the phase is not critical)