Skip to content
Print

HRB950 - HD, SD digital and analog audio re-embedder/shuffler with analog outputs (3Gb/s upgradeable)


GRB990-950-550_BLK

Description

The HRB950 is a 48x32 channel re-embedder, with a 16 channel embedder (2x 8 channels in 2 individual SDI streams), 4 AES/EBU or analog outputs, and 4 AES channels to the Synapse ADD-ON bus. The source audio channels can be derived from 2 x 16 channel embedded domain streams, 4 AES/EBU or analog physical audio inputs and 8 channels from the Synapse bus. The HRB950 can be future upgraded to GRB950 of GRB990. This allows for staged implementation of HD infrastructures and spread the cost over multiple budget years.

Specifications

  • 2 SDI inputs (with auto switch on carrier loss, and switch back function)
  • 2 SDI outputs (2x1 or 2x2 function)
  • Compatible with the following input formats (auto selecting)
    • 1080i/59.94
    • 1080i/50
    • 1035i/59.94 
    • 720p/59.94
    • 720p50
    • 720p30
    • 720p25
    • 720p24
    • SD525
    • SD625
  • Dual offset audio delay adjustable between 0 and 500ms
  • Dual (TWINS) or single channel SDI mode when sources are clock locked (not phase locked*)
  • 4  AES/EBU inputs with sample rate converter (available with 110 Ohm and 75 Ohm inputs)
  • 4 analog outputs.
  • AES/EBU inputs accept synchronous streams like Dolby E and asynchronous up to 96kHz sampling via the built in Sample Rate Converters.
  • Auto SRC-off for bitstream sources like Dolby E
  • 4 extra AES/EBU inputs through the Synapse bus
  • 8 presets that configure all I/O channels. controlled by GPI or ACP (Cortex)
  • S2020 metadata insertion from an external source
  • Append and overwrite modes
  • Audio level and phase control
  • Audio offset delay up to 5000 ms
  • Peak detection 0dBFS
  • Silence detection with threshold (-100 to -20dBFS) and time control (1 to 255 sec)
  • Locks to Tri-level, Bi-level syncs or SDI input
  • Full control and status monitoring through the front panel of the SFR04/SFR08/SFR18 frame and the Ethernet port (ACP)
  • Optional 1 or 2 fiber inputs, 1 or 2  fiber outputs or a fiber in and output (replacing 1 SDI in and output) on the I/O panel
  • Optional relay bypass (BHX18 or BHX18D)

Firmware


Login to MyAXON


Register for MyAXON
Reset password

Sluiten