GMW100 - 3Gb/s, HD, SD dual channel multiviewer and monitoring card with 2 SDI inputs

Description

The GMW100 is a dual channel monitoring card that can be used stand alone or as part of SynView multi display system.
The unit has 2 serial SDI inputs capable of handling signals up to 3Gb/s. The free selected inputs are displayed within a WUXGA DVI stream (1920x1200 max with BPH23) or visible on a SDI signal up to 3Gb/s (BPH24).
Next to 2 scaled pictures the unit can display up to 16 channels of audio per video and these bar graphs can be positioned in different areas of the screen (side/under)

A set of alarms can be viewed inside the screen as well. These alarms will be highlighted in case of for example a freeze frame or silence detection

Features

• 2 inputs
• Low latency processing (20 mS for 50Hz, 17 mS for 59.94Hz)
• Full 10 bit in RGB domain (internal 20bit processing for scaling)
• Up to 1920x1200 resolution on DVI output (BPH23)
• Up to 1920x1080p on 3Gb/s SDI output (BPH24)
• Full variable scaling and positioning both inputs
• Alarm/Warning trigger (OSD) of the following parameters
  • Video freeze and black detection (with adjustable threshold and time)
  • WSS/VI/AFD info
  • Audio silence, clip and  format detection
  • CRC/EDH/TRS info
• Inputs compatible with (mixing is allowed):
  • 1080p 50 and 59.94
  • 1080i and 720p 50 and 59.94 Hz
  • 1080p (sf) and 720p 29.97/25/24
  • SD 625 and 525
•  15pins sub-D connector for serial UMD, Tally protocols (TSL and ASCII) and GPI triggers
•  8, 16 and 32 character UMD capability
• Three assignable regions in or under monitor to display input format,static UMD or dynamic UMD 
• Audio metering  
  • 4, 8 or 16 free selectable OSD audio level bar-graphs
  • Masked or transparent bar-graphs
  • AES/EBU, BBC, and VU scales
  • Customizable color schemes for audio meters
  • Free adjustable positioning
• Two definable clocks in Analog,Digital or Combined mode, with the following possible sources: System, VITC, ATC,  SNTP (Ethernet), LTC, Up Counter or Down Counter
• Color corrector
• UMD colors grey, green  red or amber
• Border, UMD and Tally brightness adjustment
• Safe area markers
• Automatic 4:3 and 16:9 modes through VI or WSS triggers (SD-SDI inputs)
• GPI control for Aspect Ratio (4:3 or 16:9), full screen or quad mode and Tally
• Locks to Bi-level, Tri-level syncs or SDI input
• Full control and status monitoring through the front panel of the SFR04/SFR08/SFR18 frame and the Ethernet port (ACP)