The CDV08 is an enhanced analog distribution amplifier providing a low loss electronically balanced input with loop through when used with the BPL07 or terminated when used with the BPL01. If necessary the input can be used fully floating by unscrewing the tabs on the BPL07.
|
Analog input |
||
|
Input levels |
700 mV. White to black. Nominal 1 V sync tip to white. 75 Ohms terminated with BPL01 Floating with BPL07 |
|
|
Return loss |
Measured with Mini Circuits ZFDC-15-6-75 > 40 dB, @ 5 MHz > 36 dB, @ 15 MHz > 28 dB, @ 30 MHz 75 Ohms terminated |
|
|
Common mode rejection (CMR) |
Measured with BPL07 BNC inputs floating CM signal on both inner and outer leads. CM input impedance 5 kOhms. 10 kOhms each input to GND > 68 dB, @ 50Hz > 55 dB, @ 5 MHz > 40 dB, @ 15 MHz > 30 dB, @ 30 MHz |
|
|
Analog outputs |
||
|
Output levels |
1 V sync tip to white, 75 Ohms terminated |
|
|
Number of outputs |
8 with BPL01, 7 with BPL07 |
|
|
Return loss |
Measured with Mini Circuits ZFDC-15-6-75 > 37 dB, @ 5 MHz > 34 dB, @ 15 MHz > 29 dB, @ 30 MHz. Other outputs 75 Ohms terminated |
|
|
Performance |
||
|
Frequency response |
within 0,4 dB, 0 to 5 MHz. |
|
|
Signal to noise ratio |
66.5 dB. 10KHz to 6MHz, Tektronix VM700T |
|
|
Bar tilt |
0,1 % |
|
|
Gain stability |
1% |
|
|
Miscellaneous |
|
|
Weight |
Approx. 250g |
|
Operating Temperature |
0 °C to +50 °C |
|
Dimensions |
137 x 296 x 20 mm (HxWxD) |
|
Electrical |
|
|
Voltage |
+24V to +30V |
|
Power |
<5 Watts |
Module:
CDV08: Analog video distribution amplifier with cable equalizer
Standard I/O panel:
BPL01_CDV08: I/O panel for CDV08
BPL07_CDV08: I/O panel for CDV08 with loop through
Axon provides firmware subscription notifications to alert clients of new firmware Release Levels. Reviewing the firmware subscription notifications will help you make informed decisions regarding the updating of firmware for your environment.
Sign up for a My Axon account and you'll be able to download our firmware and product documentation. If you have signed up for a My Axon already, login to subscribe for firmware notifications.