SFS11 - Multi functional frame/line synchronizer with embedding function (2 groups)

Description

The SFS11 is an SD frame synchronizer, line synchronizer / autophaser, video delay, video proc-amp and Video Index inserter. In addition, the SFS11 has a 2 group embedder. The synchronizer function can be used to synchronize a non-synchronous signal or to compensate for a delay. New sync codes (TRS) are being generated and re-inserted in the output signal. The SFS11 has total transparent blanking, both horizontally and vertically. The video reference is connected through the central genlock input of the SFR18, SFR08 or SFR04 frames.
The line synchronizer function corrects timing errors (hops) that occur due to switching in a router. In addition the SFS11 can be used as a delay line, giving up to 625 lines of delay. A video reference is not required in this case as the output clock frequency is derived from the input video clock.

Features

• Auto detecting of 525/625 with correct reference input selection (SFR08 and SFR18 only)
• Frame synchronizer or delay mode
• Automatic Line synchronizer/autophaser function
• Full frame adjustable output phase with respect to reference in sample and line increments
• Adjustable vertical interval blanking (selectable start and stop line)
• V-bit autophasing (625 only)
  • Proc-Amp
  • Y, Cr and Cb gain
• Y, Cr and Cb Black
• 2 Group embedding with Synapse ADD-ON card like the ADC20, DIO24 and others
• Blanking of two adjustable ranges in the vertical interval from line 4 to 23
• VI insertion
• EDH processing
• GPI Freeze input
• Tracking audio output
• Selectable panic freeze or manual freeze
• Full control and status monitoring through the front panel of the SFR04/SFR08/SFR18 frame and the Ethernet port (ACP)
• Optional 1 fiber input (replacing 1 SDI input) or 1 fiber output (replacing 1 SDI output) on I/O panel
• Optional 1 CVBS output (replacing 1 SDI output) on I/O panel