SAM10 - Digital to analog A/V bridge with SDI processed outputs

Description

The SAM10 is another ultimate example of combined functions and features in a single module. The module bridges the digital world to the analog world. With composite or component video and analog audio outputs, the SAM10 is the ideal card to source an analog tape machine from an SDI + embedded audio or digital audio signal. It can also be found in a studio or transmission environment that is being upgraded to a central SDI + embedded audio single layer router. If an AES/EBU layer is required, the SAM10 accepts this signal too. To preserve your investment after the infrastructure is digitized; it comes with an SDI by-pass function and can be used as an SDI de-embedder. The SAM10 is the mirror function of the ASM10.

Features

• 12-bit video D/A conversion and encoding
• 24-bit audio D/A conversion and processing
• CVBS or Component analog video outputs
• Adjustable chroma filter
  • 1.3MHz
  • 0.65Mhz
  • 1.0Mhz
  • 2.0Mhz
  • 3.0Mhz
  • CIF
  • QCIF
• Sub-carrier phase adjustment (-89 to 89 deg)
• Hue adjustment (-22 to 22deg)
• DAC gain (0.99 to 1.14 x)
• Selectable pedestal
• Proc-Amp
  • Y gain
  • C gain
  • Y-Black
  • C-Black
• Jitter trap for maximum isolation of SDI input
• Video Index and WSS insertion
• Embedding function into SDI output
• De-embedding function from SDI input to local analog outputs, bus outputs and local embedder
• Analog audio output @0dBFS can be selected between +12, +15, +18 and +14dBu
• Analog audio output can be any channel of the de-embedder or AES/EBU source
• ADD-ON audio output can be any channel of the de-embedder or AES/EBU source
• Individual AES/EBU input gain and Analog audio output gain.
• SDI by-pass mode
• Full control and status monitoring through the front panel of the SFR04/SFR08/SFR18 frame and the Ethernet port (ACP)
• Optional 1 fiber input (replacing 1 SDI input) or 1 fiber output (replacing 1 SDI output) on I/O panel